Changing LAN and WAN IP address ?

User: nebero

Password: nebero123 (you will not able to see what you are typing.)

After entering password .Press Enter..You will be promoted to the blue screen given below.

After this Press Tab key and Select Run Tool and Press Enter..

Nebero Setup Utility will flash up with its white border and blue background. Here you will define your network details and will tune Nebero according to your particular network scenario. Here you will need to define:

Note:- You can use Tab Key in order to move

INTERNAL IP ADDRESS: This IP address will be assigned to internal network card, the one which will have internal LAN cable terminated on it. All other PCs in your LAN will access internet through it. So you will have to define this IP address in their network setup as gateway and primary DNS.
EXTERNAL IP ADDRESS: This IP address will be assigned to external network card, the one which will have external cable (cable from your ISPs router) terminated on it. It is your public IP, give to you by your ISP.
GATEWAY: Gateway IP address provided by your ISP.
DNS: Primary and Secondary DNS provided by your ISP.
DMZ: IP address of your DMZ / Perimeter Area Network. If you don't have DMZ / Perimeter Area Network, don't leave this field blank, rather enter a fake IP address which doesn't clash with any of your existing network.
Save and exit from "Network configuration".